Gallery

Inoculant properties for Iron and steel

  • Ferroalloys & Alloying Additives Online Handbook - Magnesium

    Magnesium is essentially insoluble in solid steel and is not used as an alloying constituent per se. Magnesium is a powerful inoculant in cast iron. must be compatible with the compositional and property requirements of the final product.

  • 75% FeSi-Ca+Ba | Miller and Company

    In Gray Iron : Recent literature has shown once again that effects obtained from to have the greatest effect on improvement of mechanical properties. a high Aluminum European inoculant, the Calcium plus Barium alloy produced 75% FeSi-Ca+Ba can be used in all grades of ductile iron. Alloys for Steel Foundries

  • Method to Improve Inoculant Efficiency - ASI International

    the development of improved gray and ductile iron inoculants. Much of this Steel and purchased scrap were being used in the charges to replace some or all of the characteristics of the older products became available. Ferrosilicon based

  • effective inoculation of grey cast iron - Springer Link

    introducing the inoculant into liquid metal, which has a low ability to generate the refined and the consequence of this refinement are higher properties of iron

  • Improved, High-Performance, Rare Earth-Free Inoculants

    Jan 23, 2012 Foundry A produces ductile iron to a 65-45-12 specification. Melting is is added to a 1,000-lb. tundish ladle, and topped with 7 lbs. of cover steel. Table 1 compares the pertinent properties of the standard inoculant practice

  • 75% FeSi-CAB | Miller and Company

    In Gray Iron : Calcium-bearing 75% Ferrosilicon acts as an inoculant, serving to reduce results in improved graphite shape and increased physical and mechanical properties. Typical addition levels to gray iron are 2-6 pounds/ton of metal.

  • Ferrous Foundry Products provided by Carpenter Brothers, Inc.

    Cast iron is essentially an alloy of iron and silicon, with properties controlled by for the broad range of mechanical properties attainable in cast iron and steel. The role of the inoculant is to produce nuclei in the liquid iron melt which

  • Inoculants - CC Metals & Alloys

    Application: Specially sized and a proper composition for the inoculation of gray and ---------------VP316 a ladle inoculant for the inoculation of gray iron. Application: GRAPHIDOX improves quality of steel castings and increases yield

  • Patent US4749549 - Gray cast iron inoculant - Google Patents

    Jun 7, 1988 A ferrosilicon inoculant for gray cast iron containing between 0.1 to 10% takes in the solidified cast iron is very important to the characteristics of the cast iron. . To this is added strontium metal or strontium silicide and a

  • Inoculants - Iron Foundry Products - Foundry Products - Elkem

    For many years, Elkem's flagship inoculant has been the world famous elements designed to control the microstructure and mechanical properties of cast irons. give more penetration into the metal stream and may be used at low pouring

  • Ferroalloys & Alloying Additives Online Handbook - Magnesium

    Magnesium is essentially insoluble in solid steel and is not used as an alloying constituent per se. Magnesium is a powerful inoculant in cast iron. must be compatible with the compositional and property requirements of the final product.

  • 75% FeSi-Ca+Ba | Miller and Company

    In Gray Iron : Recent literature has shown once again that effects obtained from to have the greatest effect on improvement of mechanical properties. a high Aluminum European inoculant, the Calcium plus Barium alloy produced 75% FeSi-Ca+Ba can be used in all grades of ductile iron. Alloys for Steel Foundries

  • Method to Improve Inoculant Efficiency - ASI International

    the development of improved gray and ductile iron inoculants. Much of this Steel and purchased scrap were being used in the charges to replace some or all of the characteristics of the older products became available. Ferrosilicon based

  • effective inoculation of grey cast iron - Springer Link

    introducing the inoculant into liquid metal, which has a low ability to generate the refined and the consequence of this refinement are higher properties of iron

  • Improved, High-Performance, Rare Earth-Free Inoculants

    Jan 23, 2012 Foundry A produces ductile iron to a 65-45-12 specification. Melting is is added to a 1,000-lb. tundish ladle, and topped with 7 lbs. of cover steel. Table 1 compares the pertinent properties of the standard inoculant practice

  • 75% FeSi-CAB | Miller and Company

    In Gray Iron : Calcium-bearing 75% Ferrosilicon acts as an inoculant, serving to reduce results in improved graphite shape and increased physical and mechanical properties. Typical addition levels to gray iron are 2-6 pounds/ton of metal.

  • Ferrous Foundry Products provided by Carpenter Brothers, Inc.

    Cast iron is essentially an alloy of iron and silicon, with properties controlled by for the broad range of mechanical properties attainable in cast iron and steel. The role of the inoculant is to produce nuclei in the liquid iron melt which

  • Inoculants - CC Metals & Alloys

    Application: Specially sized and a proper composition for the inoculation of gray and ---------------VP316 a ladle inoculant for the inoculation of gray iron. Application: GRAPHIDOX improves quality of steel castings and increases yield

  • Patent US4749549 - Gray cast iron inoculant - Google Patents

    Jun 7, 1988 A ferrosilicon inoculant for gray cast iron containing between 0.1 to 10% takes in the solidified cast iron is very important to the characteristics of the cast iron. . To this is added strontium metal or strontium silicide and a

  • Inoculants - Iron Foundry Products - Foundry Products - Elkem

    For many years, Elkem's flagship inoculant has been the world famous elements designed to control the microstructure and mechanical properties of cast irons. give more penetration into the metal stream and may be used at low pouring



Get a quote